Urban Hardware

The 17" 1.5 hp Classic Floor Machine is powerful enough to handle tough jobs like grinding, but can also be used for more delicate jobs such as buffing finished floors. All metal handle housings, tube and trigger assemblies add to the long-lasting durability of the machine.

Features:
• Powerful 1.5 hp, 175 RPM motor can handle any job with ease
• All Steel Triple Planetary Gear Box
• Uses 17" Pads / 15" Brushes
• Thumb activated safety interlock switch prevents accidental start-ups
• High polish chrome finish is chip and corrosive resistant, keeping the Classic looking newer longer
• Full surround non-marking bumpers help prevent damage to walls and furniture

• Automatic Filter Clean pulses every 30 seconds for continuous operations without stopping to clean filter. This is a HEPA vac that comes with HEPA filters
• Powerful 15-Amp motor delivers 140 CFM of airflow for maximum suction
• Power Tool Actuation controls the On/Off operations of the vacuum with a power tool
• Variable Suction controls vacuum's power consumption and amount of suction
• Telescoping handle for easy transport

Our Drywall Sander gives you 4.7 Amps of sanding power in a lightweight, 8.5-pound unit. This variable speed sander provides a range of 1400 to 2000 RPM and features a long, 13-foot static-dissipating vacuum hose to remove potentially harmful dust. This durable sander also features hook-and-loop straps for easy handling or attachment to an external vacuum.

• Variable-speed dial settings from 1,400-2,000 RPM
• Brush-type skirt surrounds sanding pad, preventing gouging of wall joints and aiding in dust collection
• Motor located on opposite end of handle from sanding head, providing balance and control
• Built-in dust collection hose
• 1 1/4" vacuum hose is 13' long so that large areas can be sanded in one set up
• Articulating sanding head allows user to sand wide area without changing positions

The MK-101 features a powerful, high torque, fan-cooled motor and one-piece unitized steel frame. The linear guide bar system provides precise cutting on the entire length of the cut. The blade guard has been engineered to provide optimal water flow and is wide enough to accommodate a profile wheel.

• Commercial grade, fully enclosed, high torque, fan-cooled motor
• Permanently lubricated, dual-sealed, heavy-duty blade shaft bearings
• Multi-position motor post and cutting head allows operator to configure saw for convenient cutting of both large and small tiles
• Built-in water distribution system supplies water to both sides of blade
• Variable height cutting head allows for plunge cuts
• Accommodates 6" and 8" profile wheels
• Micro V-belt drive for maximum horsepower transfer from motor to blade
• Blade shaft lock for easy blade removal
• Cast aluminum blade guard and motor post
• One-piece reinforced zinc-plated steel frame

The lightweight and portable MK-370EXP Tile Saw is made to the highest professional specifications. It features a built-in adjustable 45° cutting head that allows for quick and accurate miter cuts.

• Powerful high-torque motor
• Maintenance-free, self-lubricating pinion and gear-box assembly
• Tilting head allows for precise 45º miter cuts
• Variable height cutting head allows for plunge cutting
• Sliding aluminum die-cast cutting table rips 18" tile
• Linear-bearing and chrome plated guide-bar assembly ensure precise cutting
• Single piece zinc-plated steel frame for rigidity, strength and durability
• Hinged blade guard for easy blade changes
• Heavy duty on/off switch
• Built-in water pump receptacle
• Removable thermoplastic water reservoir
• MK-Safeswitch™ prevents saw from being operated when locking key is removed
• 7" diamond blade & submersible water pump included

Breaker Hammer TE 3000 AVR - Includes Cart & 2 Chisels.

• Over 50 ft. pounds of impact energy results in outstanding demolition performance and productivity
• SR brushless motor delivers tremendous demolition performance while keeping weight down
• Active Vibration Reduction (AVR) achieves the lowest vibration in its class
• TE-H polygon self-sharpening chisels provide strong breaking power and stick less in concrete

• High drilling performance in all types of concrete
• Diamond core bit without the Hilti X-Change module system
• Industry-standard BS 1-1/4" connection end

Ultimate TE-S wide-flat chisel (polygon) for demolition of concrete surfaces

• Connection end: TE-S
• Application: Breaking structure, Surface work/layers removal, Cutting asphalt
• Length: 19.7 in

Ultimate TE-S wide-flat chisel (polygon) for demolition of concrete surfaces

• Connection end: TE-S
• Application: Breaking structure, Surface work/layers removal, Cutting asphalt
• Length: 19.7 in

Powerful SDS Plus (TE-C) rotary hammer for heavy-duty concrete drilling and corrective chiseling, with Active Vibration Reduction (AVR)

• Weight according EPTA-Procedure 01/2003: 9.3 lb.
• Working mode: Hammer drilling, Drilling, Chisel setting, Chiseling
• Hammer drilling diameter range: 5/32 - 1-3/32 in

Applications

• Drilling anchor, rebar and through holes in concrete and masonry - possible diameter range 4-28 mm, recommended diameter range 10-20 mm
• Chiselling in brick and block, corrective chiseling and surface finishing on concrete
• Drilling in wood and metal using the optional quick-release chuck and drill bits with smooth shank up to 13 mm diameter
• Driving anchor screws and concrete screw anchors

Semi-automatic powder actuated tool for fastening single nails in medium-duty applications on both concrete and steel

• Dimensions (LxWxH): 13.6 x 2 x 6.2 in
• Weight: 5.3 lb.
• Fastener Intake: Single nail

Features

• One tool for a wide range of applications
• Compact, sleek design - allows access to narrow spaces
• Easy to use and maintain - minimizing errors and tool downtime
• Consistent energy output over entire lifetime - delivering more reliable fastening quality
• Maximum nail length 62 mm, or 72 mm for wood-to-concrete applications

Applications

• Fastening formwork or formboard to concrete
• Fastening sill plates or trusses to concrete
• Ease to use and maintain - minimizing errors and tool downtime
• Fastening wall-ties to concrete or steel
• Fastening wire mesh (chicken mesh) to concrete

Premium SDS Plus (TE-C) hammer drill bit with 2-flute helix for drilling anchor holes into concrete

• Connection end: TE-C (SDS Plus)
• Base material: Concrete, Brick, Masonry, Sand-lime block, Natural stone
• Working mode: Hammer drilling, Drilling only

Features

• Two cutting edges and a direct tip-to-helix transition - faster and more constant drilling speed over the bit's entire lifetime
• Wide helix spine - transports dust more efficiently to accelerate drilling progress
• Optimized tip geometry and rugged helix transition - prolongs the bit's lifetime
• Ideal for use with a wide range of light-duty rotary hammers

Applications

• Drilling holes for metal and plastic anchors

Ultimate SDS Plus (TE-C) wide-flat chisel (polygon) for surface chipping in concrete and masonry

• Connection end: TE-C (SDS Plus)
• Application: Breaking structure, Surface work/layers removal, Cutting asphalt
• Length: 7.1 in

Features

• Innovative polygon design and self-sharpening tip - designed to deliver consistently high breaking and chiseling performance over its entire lifetime
• No resharpening, reforging or rehardening necessary
• Less sticking in concrete and masonry - leading to higher productivity
• Optimal working length
• Ground on both sides

Applications

• Chipping
• Smoothing
• Removing tiles

Ultimate SDS Plus (TE-C) narrow-flat chisel (polygon) for controlled chipping in concrete and masonry

• Connection end: TE-C (SDS Plus)
• Length: 7.1 in
• Width: 0.6 in

Features

• Innovative polygon design and self-sharpening tip - designed to deliver consistently high breaking and chiseling performance over its entire lifetime
• No resharpening, reforging or rehardening necessary
• Less sticking in concrete and masonry - leading to higher productivity
• Optimal working length
• Much less likely to stick in concrete or masonry

Applications

• Chipping
• Finishing
• Breaking

Ultimate SDS Plus (TE-C) pointed chisel (polygon) for chipping in concrete and masonry

• Connection end: TE-C (SDS Plus)
• Length: 7.1 in
• Product Class: Ultimate

Features

• Innovative polygon design and self-sharpening tip - designed to deliver consistently high breaking and chiseling performance over its entire lifetime
• No resharpening, reforging or rehardening necessary
• Less sticking in concrete and masonry - leading to higher productivity
• Reduced sticking in concrete or masonry
• Polygon form

Applications

• Light chiseling work
• Small openings

Features

• Active Torque Control (ATC) stops the tool body from spinning uncontrolledly if the drill bit jams - helping to reduce a common safety hazard
• Active Vibration Reduction (AVR) makes the tool less tiring to use - helping to increase daily productivity
• Highest productivity for a wide range of drilling and chiseling applications
• Optional DRS-Y dust removal system collects up to 95% of dust
• Detachable supply cord for quick and easy replacement of damaged/broken cords on the jobsite

Applications

• Hammer drilling in concrete, masonry and natural stone with drill bits 12-150 mm in diameter
• Drilling holes for heavy-duty anchors from 20-40 mm in diameter
• Breaching and demolition with pointed and flat chisels
• Drilling with high torque in wood and steel
• Hammer drilling in concrete, masonry and natural stone with drill bits 1/2" - 6" in diameter

Versatile breaker for demolishing or chiseling floors and occasional wall applications (with universal power cord)

• Working direction: Floor, Wall
• Tool chuck type: TE-S

Features

• High versatility - in-line design for floor breaking and ergonomic side handle for occasional wall breaking
• Maintenance-free brushless SR motor and triple-chamber lubrication systems for longer service intervals and tool lifetime
• Exceptionally low tool vibration due to Hilti AVR sub-chassis (Active Vibration Reduction) system
• Detachable supply cord for fast and easy replacement of damaged/broken supply cords on the jobsite

Applications

• Demolishing concrete and masonry at floor level or below waist level
• Renovating floors of all kinds
• Removing tiles, bushing and compacting
• Corrective chiseling, such as adjustments to door and window openings