Product Catalog
HD99 Towable Hydraulic Earthdrill
1 Man Hydraulic Towable Earth Drill
The Ground Hog HD99 is a Towable Hydraulic Earthdrill that is designed to be powerful, easy to use and require very little maintenance.
The HD99 is the most powerful earthdrill in the Ground Hog line. With it's 9hp Honda engine, the HD99 can easily dig with any Ground Hog auger up to 18 inches in diameter.
Designed to take the load off of the operator by being almost perfectly balanced with an 8-inch auger attached. There are also 3 handlebar positions that allow for normal drilling, as well as close up drilling next to an obstacle such as a wall or fence. The drilling head also pivots from side to side for drilling on uneven terrain. Large highway rated tires make the HD99 easy to maneuver around the job site and there is a locking mechanism on the digging head that allows the auger to be held up and out of the way for moving the machine around the job without having to disconnect the auger.
The Ground Hog HD99 is a powerful, well designed earthdrill you can rely on.
Rental Rates
-
4 Hour
$83.00 -
Day
$118.00 -
Day
$472.00
C-71-5 Two-man Earthdrill
Earth Drill, 2-Man, 5.5hp Honda Engine
The Ground Hog C-71-5 is two-man earth drill designed to deliver years of reliable service with superior performance. It has been a proven performer for over 40 years. It’s rugged design promotes durability and requires very little maintenance.
The heart of this unit is our time-tested transmission. The transmission is an efficient worm drive design utilizing alloy steel shafts, large tapered roller bearings and our standard 7/8" square auger drive.
Aluminum castings are used throughout the C-71-5's construction to produce a unit that is both strong and lightweight. The C-71-5 uses an air cooled centrifugal clutch and a trigger-type, return-style throttle. Both operator positions are equipped with individual stop switches and tubular steel handlebars.
Rental Rates
-
4 Hour
$69.00 -
Day
$98.00 -
Week
$392.00
Ultra Handheld Airless Paint Sprayer Cordless
Ultra airless handheld sprayers are designed specifically for small interior, exterior and specialty projects. The true advantages of the Ultra handheld sprayers are the Perfect Airless Finish, ultimate portability on the job, and that it is ready to spray in seconds. Reverse-a-Clean X FFLP tip works on all Graco Airless Sprayers. Triax piston pump. FlexLiner bag system allows you to spray at any angle - even upside down. Fast and easy Pro-Connect pump replacement system. Procontrol II adjusts motor speed. Smartcontrol advanced pressure control. Powered by DeWalt XR 20V lithium ion system - spray up to 1 Gal. per charge. Painting contractors can easily spray those small jobs without having to start-up their larger airless sprayer. Sprays water & mineral spirits based materials.
- Powered by DEWALT XR Lithium Ion System
- Perfect Airless Finish at Any Speed - Without Thinning
- Triax Triple Piston Pump with ProConnect
- Fully Repairable for Extended Life
- Uses RAC X FFLP Spray Tips
Rental Rates
-
4 Hour
$26.00 minimum -
Day
$37.00 -
Week
$148.00
Pump Armor 1oz
- Protects your sprayer's pump for storage and freeze proof to -30° F
- After the sprayer is cleaned, fill pump with Pump Armor fluid and leave it in until you use it again
- Special nozzle allows for clearing the intake valve at start-up to provide reliable priming every time
- For use with all TrueCoat Handheld Airless Sprayers
Please contact us for current pricing and availability.
Request AvailabilitySpray Hose Cover Roll - 1 roll x 1000 ft
The Spray Hose Cover 865696 by Airlessco, a Graco subsidiary, contains 1 roll of 1000 feet (305m). Use this hose cover to protect your paint hose from paint and abrasion damages.
Purchase Price
-
Purchase
$66.95
Carpeted 18 X 30 Furniture Dolly
18x30 Furniture Dolly-Carpeted, 1,000LB Weight Capacity
- Carpeted ends - Provide cushioning and protect furniture from scuffing.
- Strong, extra thick boards. Durable, non-marking wheels.
Rental Rates
-
4 Hour
$7.00 minimum -
Day
$10.00 -
Week
$40.00
800lb Appliance Dolly
Features.
800 lbs. Capacity appliance dolly.
Constructed with 3/4 in. Steel tubing.
6 x 2 in. Solid rubber tires.
Manual belt tightener..
Moves large appliances water heaters & similar products.
Dimension - 60 x 20 x 11 in.
Item weight - 50 lbs.
Rental Rates
-
4 Hour
$14.00 minimum -
Day
$20.00 -
Week
$80.00
3⁄4" NPT x 38" long Conduit Bender
- 3/4 inch NPT x 38 inch long
- Constructed of high-strength steel
- Powder painted for increased durability
- Comfort grip design ensures increased grasping capabilities
- Sturdy - lightweight handle is an industry standard size to use on competitor benders
Please contact us for current pricing and availability.
Request Availability1" x 38" long Conduit Bender
Includes industry standard marking to simplify the job. Made of rugged, heat-treated aluminum, and backed by a lifetime warranty. Designed for strength and durability this handle is constructed of high-strength steel. The red powder-painting not only increases the durability but ensures quick visibility on the job site. Comfort grip design improves grasping capabilities and leverage.
- Embossed sight lines for 10 deg, 22 deg, 30 deg, 45 deg, 60 deg and 90 deg
- Industry-standard markings - 30 deg bend when handle is straight up
- Bigger hook with a 5x durability factor
- Bigger foot pedal - 40% larger. More foot room allows for use with a booted foot
- Bend-back channel easily corrects conduit over-bends
- Vise-Mate holds conduit while cutting or reaming
- Red handle constructed of high-strength steel and powder painted for increased
durability and hi-vis on job site - 5.81" bend radius
- 1" EMT and 3/4" Rigid
Please contact us for current pricing and availability.
Request Availability3/4", EMT Big Ben Conduit Bender
Gardner Bender's Big Ben aluminum hand bender has improved traditional hand benders by enlarging the hook with a 5x durability factor, increasing the foot pedal size and clearance by 40 percent , highlighting the markings and incorporating a dual sight-line system for bending on the floor or in the air. Includes industry standard marking to simplify the job. Comfort grip design improves grasping capabilities and leverage.
- Embossed sight lines for 10 deg, 22 deg, 30 deg, 45 deg, 60 deg and 90 deg
- Industry-standard markings - 30 deg bend when handle is straight up
- Bigger hook with a 5x durability factor
- Bigger foot pedal - 40% larger. More foot room allows for use with a booted foot
- Bend-back channel easily corrects conduit over-bends
- Vise-Mate holds conduit while cutting or reaming
- Red handle constructed of high-strength steel and powder painted for increased durability and hi-vis on job site
- Fits handle BH-75 (included)
- Bend radius 4.74 inches
- 3/4" EMT and 1/2" Rigid
Please contact us for current pricing and availability.
Request Availability1/2", EMT Big Ben Conduit Bender
Includes industry standard marking to simplify the job. Designed for strength and durability this handle is constructed of high-strength steel. The red powder-painting not only increases the durability but ensures quick visibility on the job site. Comfort grip design improves grasping capabilities and leverage.
- Embossed sight lines for 10 deg, 22 deg, 30 deg, 45 deg, 60 deg and 90 deg
- Industry-standard markings - 30 deg bend when handle is straight up
- Bigger hook with a 5x durability factor
- Bigger foot pedal - 40% larger. More foot room allows for use with a booted foot
- Bend-back channel easily corrects conduit over-bends
- Vise-Mate holds conduit while cutting or reaming
- Red handle constructed of high-strength steel and powder painted for increased durability and hi-vis on job site
- Fits handle BH-75 (included)
- 3.69" bend radius
- 1/2" EMT
Please contact us for current pricing and availability.
Request Availability3/8" x25' Electric Drain Cleaner
3/8" x 25', drain cleaner, electric drill powered, cleans 1-1/4" to 2-1/2" diameter inside lines, galvanized aircraft wire, re-enforced cable gives longer life, commercial grade, 1/2" Capacity drill, 0-600 RPM, stainless steel cable drum will not rust, cast aluminum hand guard, hand tighten Jacob's Chuck requires less maintenance.
Rental Rates
-
4 Hour
$26.00 minimum -
Day
$37.00 -
Week
$148.00
AutoFeed Model R 3/4" x 100' Electric Snake
The Model R is designed to clean 3"-6" lines for distances up to 100’ and is ideal for both the homeowner and contractor. The unit runs either 5/8" or 3/4" cable and is built on a rugged 1-1/4" steel tubing frame with an open cage for quick inspection and easy cleaning.
Large 10" wheels allow for easy maneuvering and a 20" power cord with a built in GFCI protects the operator. A typical application for the Model R is cleaning tree roots from a main sewer line that runs from the house to the street.
Snap-lock tool connector holds cleaning tools securely in place; no screws required to connect tools.
Please contact us for current pricing and availability.
Request AvailabilityE-AF Auto Cable Feed Drain Cleaner, 1/2" x 50 feet
1/2"x50' Electric 1/3 HP
- Cleans 1.25"-3" lines up to 50 feet
- Two-way auto cable feed advances and retrieves cable with the push of a lever
- Cable guide keeps hands off rotating guide
- Inner drum eliminates cable buckling in cage
- Built-in drum shaft slip clutch
Rental Rates
-
4 Hour
$40.00 minimum -
Day
$57.00 -
Week
$228.00
Music Wire Toilet Auger, 3'
- The Hande manual closet auger can be used to clear obstructions in any kind of toilet
- Heavy-duty zinc-plated steel construction with an extra flexible 3 ft music wire cable
- The protective tubing also prevents damage to the bowl as you clear
Toilet augers "hande" removes obstructions in any type of toilet. 3 feet music wire cable for greater flexibility. Heavy duty zinc plated construction. Protective tubing helps prevent marring of toilet bowl.
Rental Rates
-
4 Hour
$9.00 minimum -
Day
$13.00 -
Week
$52.00
FiveStar™ Self-Contained Carpet Extractor 4gallon
The FiveStar is a compact, self-contained carpet extractor with powerful brush agitation to effectively clean carpets, hard floors and grouted tile. It weighs only 40 pounds so it’s light enough for anyone to handle, plus the compact body design and fold-down handle make it a breeze to transport and store. The FiveStar self-contained carpet extractor is very easy to use with built-in solution and recovery tank that can be used as a portable bucket.
Rental Rates
-
4 Hour
$22.00 minimum -
Day
$32.00 -
Week
$128.00
Upholstery Cleaning Tool Kit
15' Hose & Tool Kit. Vacuum & Solution Hose With Upholstery Hose & Tool Kit.
Our upholstery cleaning tool kit contains our black powder coated detailer tool model 321ACH, 8' hose assembly, hose fittings and a durable mesh hose bag.
Our 321AC tool is cast aluminum with a black powder coat finish and an enclosed spray chamber. A round glass window gives you the ability to monitor your progress as you lift off stains and debris. Recirculating notches decrease water build-up in spray chamber for faster drying time.
For use on FiveStar and Comet models only.
Please contact us for current pricing and availability.
Request AvailabilityAir-Powered Chisel Scaler
5' Ergonomic Steel Chisel Scaler ALR-E
- Removes up to 200 sq. ft. per hour of 4" ceramic tile set in standard thin-set
- Provides 2,500 hits per minute
- ALR-E Ergonomic design lets operator stand upright eliminating backaches
- High-strength tubular handle and soft foam hand grips for operator comfort
- Quick-change, hardened steel tool chuck accepts dozens of accessories
- Available in heavy-duty steel or lightweight aluminum
- Requires only 6-8 CFM at 80-90 PSI
Rental Rates
-
4 Hour
$36.00 minimum -
Day
$36.00 -
Week
$95.00
8" Manual Tile Shark Floor Stripper
Tile Shark Floor Stripper TS-8-75L - 5pk, 8" rigid blades included
- Remove up to 200 sq. ft. per hour of vinyl or other related soft material (Square footage amounts and time schedules will vary based on material and adhesion)
- Folding handle for easy transport & storage
- Sharktooth wrench for easy blade changes
- Heavy-duty steel material deflector shield
- Multiple position hand held assembly
- Heavy-duty flexible rubber isolators
- Belt-driven oscillating blade system provides 1,850 oscillating hits per minute
- Quick release pin angle adjustment
- 7-Gauge steel welded construction
- Push plate & built-in weight make material removal a quick & easy job
- Pinch blade system accepts floor stripper blades of any make & size
Rental Rates
-
4 Hour
$50.00 minimum -
Day
$65.00 -
Week
$225.00
E-Z Trench Bedscaper BE400
E-Z Trench Mfg. Bedscraper Landscape Edger and Mini Trencher. Optional Blade Needed
The Bedscaper BE400 bed edger has more power and the added durability of a centrifugal clutch that is bathed in oil. Depth adjustment is controlled at the handles as well as the throttle. The BE400 can also trench 7" deep!
Great for:
- Creating Beautiful Curved Landscape Beds
- Redefining Existing Beds with Precision
- Installing Metal or Plastic Edging
- Installing Concrete Pavers (Paver Blade Required)
- Installing Landscape Timbers (Paver Blade Required)
- Installing Low Voltage Lighting or Underground Pet Fencing
Rental Rates
-
4 Hour
$67.00 minimum -
Day
$96.00 -
Week
$384.00
8gal Dehumidifier
The Dri-Eaz 1200 Dehumidifier with an 8-gallon capacity and Xactimate Code WTRHDM is a proven commercial-grade unit for drying damp construction and industrial sites, and controlling humidity in basements, shops, garages, utility rooms and more. It removes up to 18 gallons of water a day. Highly mobile, this unit is easy to use. It features a hot-gas bypass for fast defrost; rugged roto-molded, stackable housing for storage; and electronic touch-pad controls with 4 languages. Semi-pneumatic wheels allow easy transport. The duct attachment ring is built in. Automatic restart functions when power is restored after an outage.
- Quickly reduces humidity levels in basements, utility rooms and shower areas where mildew or mold can grow
- Dries out enclosed areas up to 12,000 cu. ft.
- Large wheels allow easy transportation
- Designed to keep on hand for anytime humidity levels spike
- Automatic pump-out allows continuous operation with no worries about emptying tanks or overflowing trays
Rental Rates
-
4 Hour
$35.00 minimum -
Day
$50.00 -
Week
$200.00
13hp Stump Grinder
• Powered by reliable, long lasting 13hp Honda GX engine
• Oil shutdown sensor
• Direct belt drive
• Cyclone air cleaner
• 1.375" diameter bearings
• Unique side discharge frame
• Comfortable to use
- Handlebar has five different positions
• 3-in-1 tooth system
- Greenteeth 500 series teeth
- Features concave "dish" cutting edge that sheers rather than shreds
- Teeth can be rotated in three 120° increments for fresh cutting edge
• Towable with optional tow bar package
- Easily attach and detach
Rental Rates
-
4 Hour
$109.00 minimum -
Day
$155.00 -
Week
$620.00
6" Deluxe Carpet Seam Roller
Deluxe Carpet Seam Roller
Please contact us for current pricing and availability.
Request AvailabilityDeluxe Adjustable Knee Kicker
Please contact us for current pricing and availability.
Request Availability